MOTORIZED VERTICAL PRINTING PRINTER GROUP FOR LARGE PRINT RUNS

An integral part of our solutions for one colour printing, the vertical printing printer group is adapted for the continuous printing of large runs, reaching up to 120m/min. Always placed in line with the client’s machine and synchronised with the machine speed via the encoder, it can print on the full width of the film or on different parts of the full width, using the same impression roll. Stamps can be etched to the impression roll on the desired positions. The distances between prints depend on the perimeter of the impression roll, which can be easily changed if you wish to have other printing distances.

GENERAL INFORMATION

USEFUL MEASUREMENT STAMP SIZES OPERATION COLOURS TYPE OF INK SPEED
From 300mm-3000mm
Impression roll resized to reflect client requirements
Work cycle started automatically via the encoder. When it is necessary to interrupt the print run, the impression roll moves away from the film, but the anilox (engraved) roll and the rubber roll continue to turn to prevent the ink from drying. This means that printing may be restarted without the need to clean the ink reservoir or change the respective ink
1 Colour
Solvent or water-based
Placed in line, it can work at 120m/min
LOCATION STRUCTURE SPECIFIC FEATURES OPTIONS
In line with an extruder, rewinder, slitter
a) Impression Roll; b) Anilox (Engraved) Roll; c) Rubber Roll; d) Gearing via cogs e) Closed ink reservoir with level control; f) Micrometric adjustment of all rolls; g) Electric Motor; h) Line Speed Encoder
We suggest a 20 L ink reservoir with pump to assist ink circulation so as to obtain improved equipment performance
Equipment can be supplied incorporated into a structure with: a) Rocker to guarantee film tension; b) Dryer: to help to dry the film immediately after printing for winding