MACRO-PERFORATOR

Macro-Perforators are used to punch holes in plastic film and have numerous industrial, agricultural and foodstuff applications. This equipment can be supplied with one or two perforating stations, depending on the performance required by the client. Depending on the minimum perforation distance, a macro-perforator can achieve working speeds of 120m/min. A two-station macro-perforator increases performance by around 40%, ensuring improved perforation quality and less wear on perforators.

GENERAL INFORMATION

ELECTROMAGNETIC REELS Ø OF OPENINGS MINIMUM TRANSVERSAL DISTANCE BETWEEN OPENINGS PERFORATION FREQUENCY FILM THICKNESS
GM 20
0.7 - 8 MM Ø
20 MM
MAXIMUM 40/ SEG
0.005 - 0.100 MM
GM 40
0.7 - 15 MM Ø
40 MM
MAXIMUM 40/ SEG
0.005 - 0.300 MM
GM 60
15 - 100 MM Ø
60 MM
MAXIMUM 20 / SEG
0.010 - 1.500 MM
TYPE USEFUL ZONE OPERATION INSTALLATION SPEED OTHER
- With one perforation station;
- With two perforation stations;
Depending on client requirements
Programable distance between punches. Possible synchronization via Photocell
Extrusion line (not in areas where inflammable material is used), rewinders and slitters
The client’s production line speed is matched via an encoder
Our macro-perforators are supplied with an electrical panel with display for programming parameters and storing plans. Should you opt for continuous work, machines are supplied with an electrical panel for speed control. Macro-perforators can also work with or without a photocell

ACCESSORIES

– Vacuum pump suction system;

– Big Bag and Venturi aspiration systems;

– Die grinding machine